Harper Anilox Rollers: LaserKote Volume Chart

LaserKote Volume Chart for Thick Film Coatings (45° Quad)

This LaserKote™ volume chart outlines examples of volumes to be used with various coating materials based on percent solids. This chartshould be used only as a guide. Actual coating specification should be reviewed and reconfirmed with each application.

45° QUAD LaserKote™ Volume Chart (for Thick Film Coatings)
	Approximate Depth Range (in microns*)		Final Volume Range (in BCMs**)
Cell Count	Min.	Max.	Min.	Max.	Minimum Roll Diameter Tolerance
40	210	270	44	55	0.008
45	185	235	39	50	0.007
50	165	215	35	45	0.006
55	152	195	31	41	0.005
60	138	176	28	37	0.005
65	126	162	25	33	0.004
70	117	152	23	31	0.004
75	110	140	22	29	0.004
80	105	132	21	27	0.004
85	98	125	20	25	0.004
90	94	120	19	24	0.004
95	89	115	18	23	0.004

*Microns are a metric unit of measurement. There are 25.4 microns in .001"

**BCMs are billion cubic microns per square inch of surface area

Note: All volumes manufactured and measured using Echotopography™. All screens will be polished after engraving as indicated in the chart above. Minimum OD tolerance must be observed as diameter increase does not allow for tighter tolerances.