Harper Anilox Rollers: LaserKote Volume Chart

LaserKote Volume Chart for Thin Film Coatings (60° Hexagon)

These LaserKote™ volume charts outline examples of volumes to be used with various coating materials based on percent solids. These should be used only as guides. Actual coating specification should be reviewed and reconfirmed with each application.

60° Hexagon LaserKote™ Volume Chart (for Thin Film Coatings)
	Approximate Depth Range (in microns*)		Final Volume Range (in BCMs**)
Cell Count	Min.	Max.	Min.	Max.	Minimum Roll Diameter Tolerance
120	35	48	9.9	12.5	0.0040
140	29	41	7.6	10.6	0.0040
180	19	31	5	8	0.0040
200	17	28	4.5	7.1	0.0030
250	15	24	3.9	6.2	0.0030
300	13	20	3.4	4.9	0.0030
400	10	16	2.4	3.8	0.0020
500	9	13	2.3	3.2	0.0020
600	7	11	1.7	2.6	0.0020
700	6	10	1.5	2.3	0.0020
800	5	9	1.2	1.8	0.0020

*Microns are a metric unit of measurement. There are 25.4 microns in .001"

**BCMs are billion cubic microns per square inch of surface area

Note: All volumes manufactured and measured using Echotopography™. All screens will be polished after engraving as indicated in the chart above. Minimum OD tolerance must be observed as diameter increase does not allow for tighter tolerances.